Elcometer Canadian Distributor

1 800 463-4363
My Account
|

Rugotest Shot & Grit Surface Profile Comparator | Elcometer 129-1/2/3

$362.22 CAD

• Estimate surface roughness by touch and sight.

• Available in grit and shot.

SKU: E129----1/2/3 Categories: ,

This surface roughness tester is ideal for proper and effective preparation of a surface profile prior to coating is essential.

Making sure that the correct roughness – or surface profile – has been generated is essential. If the profile is too low, the adhesion of the coating to the surface will be reduced. Too high and there is the danger that the profile peaks will remain uncoated – allowing rust spots to occur.

The Elcometer 129 Surface Comparators are available in two models:

  • Elcometer 129 Rubert – available in grit and shot versions.
  • Elcometer 129 Rugotest – shot and grit profiles on the same block.

Roughness is displayed in both “classes” and “roughness averages” for easier identification and are available in Metric units.

  • 6 Roughness Values per Comparator
Technical Specifications – Elcometer 129 Rubert & Rugotest Surface Comparator
Part Number Description Section Profiles
E129—1 Elcometer 129/1 Rubert Grit Surface Comparator 0.4, 0.8, 1.6, 3.2, 6.3, and 12.5µm
E129—2 Elcometer 129/2 Rubert Shot Surface Comparator 0.4, 0.8, 1.6, 3.2, 6.3, and 12.5µm
E129—3 Elcometer 129/3 Rugotest Shot & Grit Surface Comparator N6, N7, N8, N9, N10 and N11 equivalent to 0.8, 1.6, 3.2, 6.3, 12.5, and 25µm roughness averages respectively

This surface roughness tester is ideal for proper and effective preparation of a surface profile prior to coating is essential.

Making sure that the correct roughness – or surface profile – has been generated is essential. If the profile is too low, the adhesion of the coating to the surface will be reduced. Too high and there is the danger that the profile peaks will remain uncoated – allowing rust spots to occur.

The Elcometer 129 Surface Comparators are available in two models:

  • Elcometer 129 Rubert – available in grit and shot versions.
  • Elcometer 129 Rugotest – shot and grit profiles on the same block.

Roughness is displayed in both “classes” and “roughness averages” for easier identification and are available in Metric units.

  • 6 Roughness Values per Comparator
Technical Specifications – Elcometer 129 Rubert & Rugotest Surface Comparator
Part Number Description Section Profiles
E129—1 Elcometer 129/1 Rubert Grit Surface Comparator 0.4, 0.8, 1.6, 3.2, 6.3, and 12.5µm
E129—2 Elcometer 129/2 Rubert Shot Surface Comparator 0.4, 0.8, 1.6, 3.2, 6.3, and 12.5µm
E129—3 Elcometer 129/3 Rugotest Shot & Grit Surface Comparator N6, N7, N8, N9, N10 and N11 equivalent to 0.8, 1.6, 3.2, 6.3, 12.5, and 25µm roughness averages respectively