0 items
This thickness transducer is designed for applications on glass, aluminium, and titanium applications
Works seamlessly with the ElcometerNDT MTG4, MTG6DL, and MTG8DL model instruments. Also works with Elcometer 304CDL.
Dual & Single Element Transducers |
||||||||||||||||||||||
| Connector Type | Suitable for Measuring | Suitable For | ||||||||||||||||||||
|
Part Number
|
Probe Diameter
|
Probe Configuration
|
Damping
|
ThruPaintTM
|
Potted Right Angle
|
Microdot
|
Cast Iron
|
Plastics
|
Thin Plastics
|
Fiberglass
|
Thin Fiberglass
|
Steel
|
Glass
|
Aluminium
|
Titanium
|
MTG2
|
MTG4
|
MTG6
|
MTG8
|
PTG6
|
PTG8
|
Calibration Certificate
|
1.00 MHz Dual Element Thickness Transducer |
||||||||||||||||||||||
| TXC1M00EP-2 | 1/2″ | Right Angle | S | • | • | • | • | • | • | • | • | • | ||||||||||
2.25 MHz Dual Element Thickness Transducer |
||||||||||||||||||||||
| TXC2M25CP-2 | 1/4″ | Right Angle | S | • | • | • | • | • | • | • | • | • | ||||||||||
| TXC2M25EP-2 | 1/2″ | Right Angle | S | • | • | • | • | • | • | • | • | |||||||||||
3.50 MHz Dual Element Thickness Transducer |
||||||||||||||||||||||
| TXC3M50EP-1 | 1/2″ | Right Angle | CT, HD | • | • | • | • | • | • | • | • | • | • | • | ||||||||
5.00 MHz Dual Element Thickness Transducer |
||||||||||||||||||||||
| TXC5M00BP-4 | 3/16″ | Right Angle | CT, HD | • | • | • | • | • | • | • | • | • | • | |||||||||
| TXC5M00CP-4 | 1/4″ | Right Angle | S | • | • | • | • | • | • | • | • | • | ||||||||||
| TXC5M00BP-6 | 1/4″ | Right Angle | CT, HD | • | • | • | • | • | • | • | • | • | • | |||||||||
| TXC5M00CP-8 | 1/4″ | High Temp | HD | • | • | • | • | • | • | • | • | • | ||||||||||
| TXC5M00EP-3 | 1/2″ | Right Angle | S | • | • | • | • | • | • | • | • | • | ||||||||||
| TXC5M00EP-4 | 1/2″ | Right Angle | CT, HD | • | • | • | • | • | • | • | • | • | • | |||||||||
7.50 MHz Dual Element Thickness Transducer |
||||||||||||||||||||||
| TXC7M50BP-3 | 3/16″ | Right Angle | CT, HD | • | • | • | • | • | • | • | • | • | • | • | ||||||||
| TXC7M50CP-4 | 1/4″ | Right Angle | S | • | • | • | • | • | • | • | • | • | • | |||||||||
| TXC7M50CP-5 | 1/4″ | Right Angle | CT, HD | • | • | • | • | • | • | • | • | • | • | • | ||||||||
10.0 MHz Dual Element Thickness Transducer |
||||||||||||||||||||||
| TXC10M0BP-1 | 3/16″ | Right Angle | S | • | • | • | • | • | • | • | • | |||||||||||
| TXC10M0CP-4 | 1/4″ | Right Angle | S | • | • | • | • | • | • | • | • | |||||||||||
15.0 MHz Single Element Transducer |
||||||||||||||||||||||
| TXC15M0CM | 1/4″ | Right Angle | S | • | • | • | • | • | • | • | • | |||||||||||
20.0 MHz Single Element Transducer |
||||||||||||||||||||||
| TXC20M0CM | 1/4″ | Right Angle | S | • | • | • | • | • | • | • | • | |||||||||||
Delay Lines |
||||||||||||||||||||||
| Each gauge is supplied with 9mm and 12mm acrylic delay lines suitable for measuring on steel, aluminum and titanium. If measuring on thin plastics using Plastic Mode (PLAS), a graphite delay line must be used. These are available to purchase as optional accessories. |
||||||||||||||||||||||
| Part Number | Description | |||||||||||||||||||||
| T92016528 | Acrylic Delay Line; 1/4 Dia x 9mm | |||||||||||||||||||||
| T92016529 | Acrylic Delay Line; 1/4 Dia x 12mm | |||||||||||||||||||||
| T92023853-4 | Graphite Delay Line; 1/4 Dia x 3/16″ | |||||||||||||||||||||
| All transducers are supplied with a calibration certificate HD—Highly damped Transducer CT—Damped Coating Thickness Transducer S—–Standard undamped Transducer |
||||||||||||||||||||||
This thickness transducer is designed for applications on glass, aluminium, and titanium applications
Works seamlessly with the ElcometerNDT MTG4, MTG6DL, and MTG8DL model instruments. Also works with Elcometer 304CDL.
Dual & Single Element Transducers |
||||||||||||||||||||||
| Connector Type | Suitable for Measuring | Suitable For | ||||||||||||||||||||
|
Part Number
|
Probe Diameter
|
Probe Configuration
|
Damping
|
ThruPaintTM
|
Potted Right Angle
|
Microdot
|
Cast Iron
|
Plastics
|
Thin Plastics
|
Fiberglass
|
Thin Fiberglass
|
Steel
|
Glass
|
Aluminium
|
Titanium
|
MTG2
|
MTG4
|
MTG6
|
MTG8
|
PTG6
|
PTG8
|
Calibration Certificate
|
1.00 MHz Dual Element Thickness Transducer |
||||||||||||||||||||||
| TXC1M00EP-2 | 1/2″ | Right Angle | S | • | • | • | • | • | • | • | • | • | ||||||||||
2.25 MHz Dual Element Thickness Transducer |
||||||||||||||||||||||
| TXC2M25CP-2 | 1/4″ | Right Angle | S | • | • | • | • | • | • | • | • | • | ||||||||||
| TXC2M25EP-2 | 1/2″ | Right Angle | S | • | • | • | • | • | • | • | • | |||||||||||
3.50 MHz Dual Element Thickness Transducer |
||||||||||||||||||||||
| TXC3M50EP-1 | 1/2″ | Right Angle | CT, HD | • | • | • | • | • | • | • | • | • | • | • | ||||||||
5.00 MHz Dual Element Thickness Transducer |
||||||||||||||||||||||
| TXC5M00BP-4 | 3/16″ | Right Angle | CT, HD | • | • | • | • | • | • | • | • | • | • | |||||||||
| TXC5M00CP-4 | 1/4″ | Right Angle | S | • | • | • | • | • | • | • | • | • | ||||||||||
| TXC5M00BP-6 | 1/4″ | Right Angle | CT, HD | • | • | • | • | • | • | • | • | • | • | |||||||||
| TXC5M00CP-8 | 1/4″ | High Temp | HD | • | • | • | • | • | • | • | • | • | ||||||||||
| TXC5M00EP-3 | 1/2″ | Right Angle | S | • | • | • | • | • | • | • | • | • | ||||||||||
| TXC5M00EP-4 | 1/2″ | Right Angle | CT, HD | • | • | • | • | • | • | • | • | • | • | |||||||||
7.50 MHz Dual Element Thickness Transducer |
||||||||||||||||||||||
| TXC7M50BP-3 | 3/16″ | Right Angle | CT, HD | • | • | • | • | • | • | • | • | • | • | • | ||||||||
| TXC7M50CP-4 | 1/4″ | Right Angle | S | • | • | • | • | • | • | • | • | • | • | |||||||||
| TXC7M50CP-5 | 1/4″ | Right Angle | CT, HD | • | • | • | • | • | • | • | • | • | • | • | ||||||||
10.0 MHz Dual Element Thickness Transducer |
||||||||||||||||||||||
| TXC10M0BP-1 | 3/16″ | Right Angle | S | • | • | • | • | • | • | • | • | |||||||||||
| TXC10M0CP-4 | 1/4″ | Right Angle | S | • | • | • | • | • | • | • | • | |||||||||||
15.0 MHz Single Element Transducer |
||||||||||||||||||||||
| TXC15M0CM | 1/4″ | Right Angle | S | • | • | • | • | • | • | • | • | |||||||||||
20.0 MHz Single Element Transducer |
||||||||||||||||||||||
| TXC20M0CM | 1/4″ | Right Angle | S | • | • | • | • | • | • | • | • | |||||||||||
Delay Lines |
||||||||||||||||||||||
| Each gauge is supplied with 9mm and 12mm acrylic delay lines suitable for measuring on steel, aluminum and titanium. If measuring on thin plastics using Plastic Mode (PLAS), a graphite delay line must be used. These are available to purchase as optional accessories. |
||||||||||||||||||||||
| Part Number | Description | |||||||||||||||||||||
| T92016528 | Acrylic Delay Line; 1/4 Dia x 9mm | |||||||||||||||||||||
| T92016529 | Acrylic Delay Line; 1/4 Dia x 12mm | |||||||||||||||||||||
| T92023853-4 | Graphite Delay Line; 1/4 Dia x 3/16″ | |||||||||||||||||||||
| All transducers are supplied with a calibration certificate HD—Highly damped Transducer CT—Damped Coating Thickness Transducer S—–Standard undamped Transducer |
||||||||||||||||||||||
