PTG6 has a measurement range of 0.15mm (0.006”) to 25.40mm (1.000”) with ±1% accuracy, across three measurement modes, interface Echo (I-E), Echo-Echo (E-E), and Plastic Mode (PLAS). This gauge measurements with pinpoint accuracy.

Main advantages of PTG6

Interface Echo (I-E) Echo-Echo (E-E) ) & Plastic Mode (PLAS) measurement modes
Measurement range from 0.15mm (0.006″) to 25.40mm (1.00″)
2-Point, 1-Point, Material, Thickness Set and Factory Calibration options
User selectable measurement rate; 4,8,16 readings per second
User selectable reading resolution; 0.1mm (0.01″) or 0.01mm (0.001″)
USB output to ElcoMaster®

Calibration Options
The PTG6 has a number of calibration options. Using an uncoated sample of test material of a known thickness, the gauge can be calibrated using 1-Point calibration. Alternatively, the user can select one of 39 pre-set materials stored within the gauge including; aluminum, steel, stainless steel, cast iron, plexiglass, PVC, polystyrene and polyurethane.

The PTG6 also offers the additional calibration options of 2-Point & Velocity.

Data Output
Compatible with ElcoMaster® software, individual readings can be downloaded via USB to PC or similar device for further analysis.

Is PTG6 right for my project?
Part Number (with Transducer)¹	PTG6-TXC
Part Number (gauge only)	PTG6
Easy to use menu structure in multiple languages	■
Tough, impact, waterproof and dust resistant equivalent to IP54	■
Bright colour screen with permanent backlight	■
Ambient light sensor, with adjustable brightness	■
Scratch and solvent resistant display; 2.4″ (6cm) TFT	■
Large positive feedback buttons	■
USB power supply via PC	■
Gauge software updates²via ElcoMaster^® Software	■
2 year gauge warranty³	■
Measurement Mode
Echo-Echo (E-E)	■
Interface Echo (I-E)	■
Plastic Mode (PLAS)	■
Measurement Rate	4, 8, 16Hz⁴
Thickness Range⁵
E-E 0.15 – 10.15mm (0.006-0.400″)	■
I-E 1.65 – 25.40mm (0.065-1.000″)	■
PLAS 0.15 – 5.00mm (0.006-0.197″)	■
Measurement Accuracy⁶	±1% or ±0.015mm (0.0006″)
Measurement Units	mm or inches
Repeatability / Stability Indicator	■
Display Mode: Reading	■
Selectable Reading Resolution
Lo; ie 0.1mm, 0.01 Inch, 10m/s, or 0.001 in/μs	■
Hi; i.e. 0.01mm, 0.001 Inch, 1m/s, or 0.0001 in/μs	■
Calibration Options
1 – point	■
2 – point	■
Material selection; 39 preset materials	■
Factory; resets to the factory calibration	■
Velocity (speed of sound)	■
Calibration Features
Calibration lock: with optional PIN Lock	■
Test calibration feature	■
Data Output
USB; to PC	■
ElcoMaster^® software	■
Transducer Probe Type	Single element
Auto transducer recognition	■
Battery Type⁷	2 x AA
Battery Life⁷	Alkaline: 15 hours Lithium: 28 hours
Operating Temperature	-10 to 50°C (14 to 122°F)
Size (w x h x d)	145x73x37mm (5.7×2.84×1.46″)
Weight (including batteries)	210g (7.4oz)
Packing List	Elcometer PTG6, 15MHz 1/4″ Microdot right angle single element transducer, couplant, wrist harness, 3 x screen protector, protective case, plastic transit case, 2 x AA batteries, calibration certificate, two year warranty extension card, operating instructions

¹ Supplied with 15MHz 1/4″Microdot right angle single element transducer

² Internet connection required

³ The Elcometer MTG range is extendable within 60 days from date of purchase, free of charge to two years

⁴ User selectable default setting in scan mode is 16 Hz

⁵ Dependent on the material being measured and the transducer being used

⁶ Whichever is the greater

⁷ Supplied with Alkaline, Lithium and rechargable can be used with the gauges, continuous use at 1 reading per second

Product Accessories

				Suitable for measuring				Suitable for
Part Number	Probe Diameter	Probe Characteristic	Damping	Thin Plastics	Steel	Aluminium	Titanium	307 PTG6 PTG8
15.0 MHz Single Element Transducer
TXC15M0CM	1/4″	Right Angle	S	■	■	■	■	■
20.0 MHz Single Element Transducer
TXC20M0CM	1/4″	Right Angle	S	■	■	■	■	■

Download Data Sheet

Download Instruction Manual

PTG6 has a measurement range of 0.15mm (0.006”) to 25.40mm (1.000”) with ±1% accuracy, across three measurement modes, interface Echo (I-E), Echo-Echo (E-E), and Plastic Mode (PLAS). This gauge measurements with pinpoint accuracy.

Main advantages of PTG6

Interface Echo (I-E) Echo-Echo (E-E) ) & Plastic Mode (PLAS) measurement modes
Measurement range from 0.15mm (0.006″) to 25.40mm (1.00″)
2-Point, 1-Point, Material, Thickness Set and Factory Calibration options
User selectable measurement rate; 4,8,16 readings per second
User selectable reading resolution; 0.1mm (0.01″) or 0.01mm (0.001″)
USB output to ElcoMaster®

The PTG6 also offers the additional calibration options of 2-Point & Velocity.

Data Output
Compatible with ElcoMaster® software, individual readings can be downloaded via USB to PC or similar device for further analysis.

Is PTG6 right for my project?
Part Number (with Transducer)¹	PTG6-TXC
Part Number (gauge only)	PTG6
Easy to use menu structure in multiple languages	■
Tough, impact, waterproof and dust resistant equivalent to IP54	■
Bright colour screen with permanent backlight	■
Ambient light sensor, with adjustable brightness	■
Scratch and solvent resistant display; 2.4″ (6cm) TFT	■
Large positive feedback buttons	■
USB power supply via PC	■
Gauge software updates²via ElcoMaster^® Software	■
2 year gauge warranty³	■
Measurement Mode
Echo-Echo (E-E)	■
Interface Echo (I-E)	■
Plastic Mode (PLAS)	■
Measurement Rate	4, 8, 16Hz⁴
Thickness Range⁵
E-E 0.15 – 10.15mm (0.006-0.400″)	■
I-E 1.65 – 25.40mm (0.065-1.000″)	■
PLAS 0.15 – 5.00mm (0.006-0.197″)	■
Measurement Accuracy⁶	±1% or ±0.015mm (0.0006″)
Measurement Units	mm or inches
Repeatability / Stability Indicator	■
Display Mode: Reading	■
Selectable Reading Resolution
Lo; ie 0.1mm, 0.01 Inch, 10m/s, or 0.001 in/μs	■
Hi; i.e. 0.01mm, 0.001 Inch, 1m/s, or 0.0001 in/μs	■
Calibration Options
1 – point	■
2 – point	■
Material selection; 39 preset materials	■
Factory; resets to the factory calibration	■
Velocity (speed of sound)	■
Calibration Features
Calibration lock: with optional PIN Lock	■
Test calibration feature	■
Data Output
USB; to PC	■
ElcoMaster^® software	■
Transducer Probe Type	Single element
Auto transducer recognition	■
Battery Type⁷	2 x AA
Battery Life⁷	Alkaline: 15 hours Lithium: 28 hours
Operating Temperature	-10 to 50°C (14 to 122°F)
Size (w x h x d)	145x73x37mm (5.7×2.84×1.46″)
Weight (including batteries)	210g (7.4oz)
Packing List	Elcometer PTG6, 15MHz 1/4″ Microdot right angle single element transducer, couplant, wrist harness, 3 x screen protector, protective case, plastic transit case, 2 x AA batteries, calibration certificate, two year warranty extension card, operating instructions

¹ Supplied with 15MHz 1/4″Microdot right angle single element transducer

² Internet connection required

³ The Elcometer MTG range is extendable within 60 days from date of purchase, free of charge to two years

⁴ User selectable default setting in scan mode is 16 Hz

⁵ Dependent on the material being measured and the transducer being used

⁶ Whichever is the greater

⁷ Supplied with Alkaline, Lithium and rechargable can be used with the gauges, continuous use at 1 reading per second

Product Accessories

				Suitable for measuring				Suitable for
Part Number	Probe Diameter	Probe Characteristic	Damping	Thin Plastics	Steel	Aluminium	Titanium	307 PTG6 PTG8
15.0 MHz Single Element Transducer
TXC15M0CM	1/4″	Right Angle	S	■	■	■	■	■
20.0 MHz Single Element Transducer
TXC20M0CM	1/4″	Right Angle	S	■	■	■	■	■

Download Data Sheet

Download Instruction Manual

Material Thickness Gauge With Transducer Elcometer PTG 6

PTG6 has a measurement range of 0.15mm (0.006”) to 25.40mm (1.000”) with ±1% accuracy, across three measurement modes, interface Echo (I-E), Echo-Echo (E-E), and Plastic Mode (PLAS). This gauge measurements with pinpoint accuracy.

Main advantages of PTG6

Is PTG6 right for my project?

Product Accessories

PTG6 has a measurement range of 0.15mm (0.006”) to 25.40mm (1.000”) with ±1% accuracy, across three measurement modes, interface Echo (I-E), Echo-Echo (E-E), and Plastic Mode (PLAS). This gauge measurements with pinpoint accuracy.

Main advantages of PTG6

Is PTG6 right for my project?

Product Accessories

SECURE SITE

OUR POLICIES

Elcometer Login

Elcometer Registration

Material Thickness Gauge With Transducer Elcometer PTG 6

PTG6 has a measurement range of 0.15mm (0.006”) to 25.40mm (1.000”) with ±1% accuracy, across three measurement modes, interface Echo (I-E), Echo-Echo (E-E), and Plastic Mode (PLAS). This gauge measurements with pinpoint accuracy.

Main advantages of PTG6

Is PTG6 right for my project?

Product Accessories

PTG6 has a measurement range of 0.15mm (0.006”) to 25.40mm (1.000”) with ±1% accuracy, across three measurement modes, interface Echo (I-E), Echo-Echo (E-E), and Plastic Mode (PLAS). This gauge measurements with pinpoint accuracy.

Main advantages of PTG6

Is PTG6 right for my project?

Product Accessories

Related products

Elcometer 138 blasted surfaces salt test Kit

Elcometer 456 Integral Digital Coating Thickness Gauge

SECURE SITE

OUR POLICIES