0 items
Elcometer 309 excels in hot weather where the surface temperature can exceed the paint specifications
The Elcometer 309 Delta T Hygrometer provides a simple and fast measurement of relative humidity and surface temperature. It is designed for very hot, wet climates where the surface temperature can be incompatible with successful painting in terms of performance and lifetime of the coating. Measuring of relative humidity and surface temperature is fast and easy :
- Delta T (TΔ): The difference between the surface temperature (Ts) and the dewpoint temperature (Td). When TΔ is less than 3ºC (5ºF) painting should not occur.
- Relative Humidity (RH): This is the amount of water vapor taken up by air. Expressed as a percentage, RH is dependent on the air temperature. Typical maximum RH values specified by paint manufacturers are between 75% and 85%.
Specifications
- Rugged design: Suitable for use in extreme environments the Elcometer 309 digital hygrometer is dustproof and waterproof with fully sealed sensors.
- High / Low Limits: Displayed on-screen graphically as either (?) or (X) with flashing Red or Green LED’s to indicate pass or fail.
- Delta T Temperature: TΔ is pre-set at >3ºC (>5ºF), the industry norm.
- Relative Humidity: User definable upper limit can be set for RH.
- Measurement Hold / Release function: With a single button press readings are ‘frozen’ on the screen. These can then be recorded before, simply pressing the button again to ‘unfreeze’ the screen and then take further readings as necessary.
- Backlight: Provides clearly lit information – ideal in dark or confined spaces.
Complies with BS 7079-B4, ISO 8502-4
Is Elcometer 309 right for my project?
|
|
| Measuring Range | 23°F to 122°F (-5°C to 50°C) |
| Temperature Range (Air & Surface) | -4 to +176°F (-20 to +80°C) |
| Relative Humidity (RH) Range | 0 to 100%RH (Default upper limit 75%, user adjustable) |
| Resolution | 0.1°C / 0.1% |
| Power Supply | 2 x AA 1.5V Batteries or via USB Cable |
| Battery Life | Greater than 40 hours (Backlight off) |
| Dimension | 7 x 3 x 1.4″ (180 x 75 x 35mm) |
| Weight | 10.6oz (300g) |
| Certificate available | Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability |
| Packing List |
|
Before painting, the coater must meet the coatings’ parameters. These are clearly specified on the paint manufacturer’s product data-sheet.
Relative Humidity (RH) and Delta T (TΔ) are the two climatic values that are specified on datasheets.
Product Accessories
Protective Carry Case / Pouch – (T99921192)
PDF Manual
Elcometer 309 excels in hot weather where the surface temperature can exceed the paint specifications
The Elcometer 309 Delta T Hygrometer provides a simple and fast measurement of relative humidity and surface temperature. It is designed for very hot, wet climates where the surface temperature can be incompatible with successful painting in terms of performance and lifetime of the coating. Measuring of relative humidity and surface temperature is fast and easy :
- Delta T (TΔ): The difference between the surface temperature (Ts) and the dewpoint temperature (Td). When TΔ is less than 3ºC (5ºF) painting should not occur.
- Relative Humidity (RH): This is the amount of water vapor taken up by air. Expressed as a percentage, RH is dependent on the air temperature. Typical maximum RH values specified by paint manufacturers are between 75% and 85%.
Specifications
- Rugged design: Suitable for use in extreme environments the Elcometer 309 digital hygrometer is dustproof and waterproof with fully sealed sensors.
- High / Low Limits: Displayed on-screen graphically as either (?) or (X) with flashing Red or Green LED’s to indicate pass or fail.
- Delta T Temperature: TΔ is pre-set at >3ºC (>5ºF), the industry norm.
- Relative Humidity: User definable upper limit can be set for RH.
- Measurement Hold / Release function: With a single button press readings are ‘frozen’ on the screen. These can then be recorded before, simply pressing the button again to ‘unfreeze’ the screen and then take further readings as necessary.
- Backlight: Provides clearly lit information – ideal in dark or confined spaces.
Complies with BS 7079-B4, ISO 8502-4
Is Elcometer 309 right for my project?
|
|
| Measuring Range | 23°F to 122°F (-5°C to 50°C) |
| Temperature Range (Air & Surface) | -4 to +176°F (-20 to +80°C) |
| Relative Humidity (RH) Range | 0 to 100%RH (Default upper limit 75%, user adjustable) |
| Resolution | 0.1°C / 0.1% |
| Power Supply | 2 x AA 1.5V Batteries or via USB Cable |
| Battery Life | Greater than 40 hours (Backlight off) |
| Dimension | 7 x 3 x 1.4″ (180 x 75 x 35mm) |
| Weight | 10.6oz (300g) |
| Certificate available | Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability |
| Packing List |
|
Before painting, the coater must meet the coatings’ parameters. These are clearly specified on the paint manufacturer’s product data-sheet.
Relative Humidity (RH) and Delta T (TΔ) are the two climatic values that are specified on datasheets.
Product Accessories
Protective Carry Case / Pouch – (T99921192)
PDF Manual
