Elcometer Canadian Distributor

Ultrasonic Flaw Detection Gauge

$5,293.00 CAD

  • Small powerful hand-held flaw detector
  • Fast and accurate
  • Ideal for weld inspection, forgings, or composite material testing

Support, maintenance, calibration
1 800 463-4363

SKU: FD700+ Categories: ,

With all the functionality of the top-of-the-range material thickness gauge, the FD700+ Elcometer Ultrasonic Flaw Detection Gauge, when in flaw detection mode offers a variety of tool kits that enable fast and accurate flaw detection, ideal for weld inspection, forgings, or composite material testing.

Tool kits include:

  1. TRIG enabling flaw detection in both surface distance and depth from the transducer.
  2. DAC for the creation of DAC curves which are used to inform the operator of the size of any given flaw at any depth.
  3. AWS function provides automatic defect sizing in accordance with AWS D1.1 structural welding code.
  4. AVG/DGS allows automatic defect sizing using probe data, storing up to 64 custom setups.
  5. TCG (time corrected gain) increases gain as time increases, in order to achieve an overall level of sensitivity for the same flaw/reflector at different distances.

Advantages of Elcometer Ultrasonic Flaw Detection Gauge:

  1. Exceptional visibility in sunlight (AMOLED) color VGA display (320×240 pixels)
  2. Sizing Toolkits: DAC, AWS, TCG, DGS
  3. P.R.F. 8 to 333 Hz, adjustable
  4. Screen Refresh Rate: Adjustable 60 & 120 Hz
  5. Detection: Z-Cross, Flank & Peak
  6. Automatic: probe zero, probe recognition, and temperature compensation
  7. Measurement: Variety of modes to address a number of applications
  8. Large data storage with multiple formats: Alpha numeric grid and sequential w/auto identifier
  9. Up to 12 hours of battery life
  10. Data management software
Model & Part Number FD700+ Flaw Detection Gauge
Material thickness digits display
B-Scan cross-sectional display
B-Scan with digits display
Scan bar display
Coating thickness display
A-Scan display + Rectified, – Rectified, Full Waveform (RF)
Flaw detection modes TRIG, DAC, AWS, TCG, Zero Crossing, Flank, Peak
Measurement Mode PE, PETP (Temp Compensation),
EE (ThruPaint™), EEV, CT (Coating) & PECT
Measurement Rate (Thickness Mode)
Manual:
Scan mode
Scan bar display
4 readings per second
32 readings per second
6 readings per second
Measuring Range PE: 0.63 – 30480mm (0.025 – 1,200 inches)
PETP: 0.63 – 30480mm (0.025 – 1,200 inches)
EE: 1.27 – 102mm (0.050 – 4.000 inches)
EEV: 1.27 – 25.4mm (0.050 – 1.000 inch)
CT: 0.01 – 2.54mm (0.0005 – 0.100 inch)
PECT: 0.63 – 30480mm (0.025 – 1,200 inches)
PECT: 0.01 – 2.54mm (0.0005 – 0.100 inch)
Measurement Accuracy ±0.01mm (±0.001 inch)
Measurement Resolution 0.01mm (0.001 inch)
Velocity Calibration Range 256 – 16,000m/s (0.0100 – 0.6300in/ms)
Additional Features:
    High speed scan mode
    Differential mode
    Limit alarm mode
    B-Scan display speed adjustable display speed
    Calibration setups 6 factory & 64 user-definable setups
transferrable to and from a PC archive
Gates 3 fully adjustable gates:
start, stop, width & threshold
Damping adjustable; impedance matching for
optimizing transducer performance
Pulser type dual 200 Volt square wave pulses with
adjustable pulse width (spike, thin, wide)
and 50 Volt cut/boost for greater penetration
Gain manual, automatic gain control (AGC)
with 110dB range with 0.2dB resolution
Timing precision 25MHz TCXO with a single shot
100MHz 8bit ultra-low-power 8-bit digitizer
Data logging – 8,000 with A/B-scan image & gauge settings
– 210,000 – coating, material, min, max thickness
– sequential and grid logging
– Alphanumeric batch identification
– OBSTRUCT indicates inaccessible locations
Calibration Options single, two-point, velocity & material type
Transducer recognition automatic
V-path / dual path error correction automatic
Probe zero automatic
Flaw Detection Mode Features
Automatic
Calibration
Longitudinal (straight),
or Shear (angle)
Probe Types Single Contact, Dual, Delay & Angle
Material Velocity Table Contains longitudinal and shear
velocities for a variety of material types
TRIG Trigonometric display of beam path,
depth, surface distance, and curved surface correction.
Used with angle beam transducers
DAC Up to 8 points may be entered and used to digitally
draw a DAC curve. Reference -2, -6, -10, (-6/-12),
(-6/-14), (-2/-6/-10) dB. Amplitude displayed in
%DAC, dB, or %FSH
AWS Automatic defect sizing in accordance with AWS
D1.1 structural welding code.
AVG/DGS Automatic defect sizing using a probe
data. Stores up to 64 custom setups
TCG Time corrected gain. 50 dB dynamic range, 20 dB
per microsecond, up to 8 points for curve definition
Detection Modes Zero-Crossing, Flank and Peak
Display Freeze Hold current waveform on screen
Peak Memory Captures peak signal amplitude.
P.R.F 8 to 333Hz in selectable steps (8, 16, 32, 66, 125,
250, 333Hz)
Pulse Width 40 to 400 ns. Selectable step
options 40, 80 & 400 ns (labeled spike, thin &
wide)
Frequency Bands FD700+ & FD700DL+: Broadband 1.8 – 19 MHz
(-3dB). FD700DL+: Three
narrow bands at 2MHz, 5MHz, 10MHz
Horizontal Linearity +/- 0.4% FSW
Vertical Linearity +/- 1% FSH
Amplifier Linearity +/- 1 dB
Amplitude Measurement 0 to 100% FSH, with 1% resolution
Delay 0 – 999in (25,375mm) at steel velocity
Display 1/4 VGA AMOLED color display
57.6 x 43.2mm (2.27 x 1.78inch)
viewable area
Display Refresh Rate 120Hz
Units (selectable) mm or inches
Backlight adjustable brightness
Repeatability / Stability Indicator
Battery Type 3 x AA alkaline
Battery Life
(approximate)
12 hours
Low Battery Indicator
Battery Save Mode auto
Operating Temperature -10 to 60ºC (14 to 140ºF)
Size (w x h x d) 63.5 x 165.0 x 31.5mm
(2.5 x 6.5 x 1.24 inches)
Weight (including batteries) 397g (14oz)
Case Design Aluminum case design with the gasket-sealed end
caps, waterproof membrane keypad
Transducer Connector Type LEMO
RS232 Interface Bi-directional
Packing List Elcometer FD700+ flaw detection gauge,
couplant, carry case, user manual, test certificate,
3 x AA batteries, software, transfer cable

Download Data Sheet

Download Instruction Manual

With all the functionality of the top-of-the-range material thickness gauge, the FD700+ Elcometer Ultrasonic Flaw Detection Gauge, when in flaw detection mode offers a variety of tool kits that enable fast and accurate flaw detection, ideal for weld inspection, forgings, or composite material testing.

Tool kits include:

  1. TRIG enabling flaw detection in both surface distance and depth from the transducer.
  2. DAC for the creation of DAC curves which are used to inform the operator of the size of any given flaw at any depth.
  3. AWS function provides automatic defect sizing in accordance with AWS D1.1 structural welding code.
  4. AVG/DGS allows automatic defect sizing using probe data, storing up to 64 custom setups.
  5. TCG (time corrected gain) increases gain as time increases, in order to achieve an overall level of sensitivity for the same flaw/reflector at different distances.

Advantages of Elcometer Ultrasonic Flaw Detection Gauge:

  1. Exceptional visibility in sunlight (AMOLED) color VGA display (320×240 pixels)
  2. Sizing Toolkits: DAC, AWS, TCG, DGS
  3. P.R.F. 8 to 333 Hz, adjustable
  4. Screen Refresh Rate: Adjustable 60 & 120 Hz
  5. Detection: Z-Cross, Flank & Peak
  6. Automatic: probe zero, probe recognition, and temperature compensation
  7. Measurement: Variety of modes to address a number of applications
  8. Large data storage with multiple formats: Alpha numeric grid and sequential w/auto identifier
  9. Up to 12 hours of battery life
  10. Data management software
Model & Part Number FD700+ Flaw Detection Gauge
Material thickness digits display
B-Scan cross-sectional display
B-Scan with digits display
Scan bar display
Coating thickness display
A-Scan display + Rectified, – Rectified, Full Waveform (RF)
Flaw detection modes TRIG, DAC, AWS, TCG, Zero Crossing, Flank, Peak
Measurement Mode PE, PETP (Temp Compensation),
EE (ThruPaint™), EEV, CT (Coating) & PECT
Measurement Rate (Thickness Mode)
Manual:
Scan mode
Scan bar display
4 readings per second
32 readings per second
6 readings per second
Measuring Range PE: 0.63 – 30480mm (0.025 – 1,200 inches)
PETP: 0.63 – 30480mm (0.025 – 1,200 inches)
EE: 1.27 – 102mm (0.050 – 4.000 inches)
EEV: 1.27 – 25.4mm (0.050 – 1.000 inch)
CT: 0.01 – 2.54mm (0.0005 – 0.100 inch)
PECT: 0.63 – 30480mm (0.025 – 1,200 inches)
PECT: 0.01 – 2.54mm (0.0005 – 0.100 inch)
Measurement Accuracy ±0.01mm (±0.001 inch)
Measurement Resolution 0.01mm (0.001 inch)
Velocity Calibration Range 256 – 16,000m/s (0.0100 – 0.6300in/ms)
Additional Features:
    High speed scan mode
    Differential mode
    Limit alarm mode
    B-Scan display speed adjustable display speed
    Calibration setups 6 factory & 64 user-definable setups
transferrable to and from a PC archive
Gates 3 fully adjustable gates:
start, stop, width & threshold
Damping adjustable; impedance matching for
optimizing transducer performance
Pulser type dual 200 Volt square wave pulses with
adjustable pulse width (spike, thin, wide)
and 50 Volt cut/boost for greater penetration
Gain manual, automatic gain control (AGC)
with 110dB range with 0.2dB resolution
Timing precision 25MHz TCXO with a single shot
100MHz 8bit ultra-low-power 8-bit digitizer
Data logging – 8,000 with A/B-scan image & gauge settings
– 210,000 – coating, material, min, max thickness
– sequential and grid logging
– Alphanumeric batch identification
– OBSTRUCT indicates inaccessible locations
Calibration Options single, two-point, velocity & material type
Transducer recognition automatic
V-path / dual path error correction automatic
Probe zero automatic
Flaw Detection Mode Features
Automatic
Calibration
Longitudinal (straight),
or Shear (angle)
Probe Types Single Contact, Dual, Delay & Angle
Material Velocity Table Contains longitudinal and shear
velocities for a variety of material types
TRIG Trigonometric display of beam path,
depth, surface distance, and curved surface correction.
Used with angle beam transducers
DAC Up to 8 points may be entered and used to digitally
draw a DAC curve. Reference -2, -6, -10, (-6/-12),
(-6/-14), (-2/-6/-10) dB. Amplitude displayed in
%DAC, dB, or %FSH
AWS Automatic defect sizing in accordance with AWS
D1.1 structural welding code.
AVG/DGS Automatic defect sizing using a probe
data. Stores up to 64 custom setups
TCG Time corrected gain. 50 dB dynamic range, 20 dB
per microsecond, up to 8 points for curve definition
Detection Modes Zero-Crossing, Flank and Peak
Display Freeze Hold current waveform on screen
Peak Memory Captures peak signal amplitude.
P.R.F 8 to 333Hz in selectable steps (8, 16, 32, 66, 125,
250, 333Hz)
Pulse Width 40 to 400 ns. Selectable step
options 40, 80 & 400 ns (labeled spike, thin &
wide)
Frequency Bands FD700+ & FD700DL+: Broadband 1.8 – 19 MHz
(-3dB). FD700DL+: Three
narrow bands at 2MHz, 5MHz, 10MHz
Horizontal Linearity +/- 0.4% FSW
Vertical Linearity +/- 1% FSH
Amplifier Linearity +/- 1 dB
Amplitude Measurement 0 to 100% FSH, with 1% resolution
Delay 0 – 999in (25,375mm) at steel velocity
Display 1/4 VGA AMOLED color display
57.6 x 43.2mm (2.27 x 1.78inch)
viewable area
Display Refresh Rate 120Hz
Units (selectable) mm or inches
Backlight adjustable brightness
Repeatability / Stability Indicator
Battery Type 3 x AA alkaline
Battery Life
(approximate)
12 hours
Low Battery Indicator
Battery Save Mode auto
Operating Temperature -10 to 60ºC (14 to 140ºF)
Size (w x h x d) 63.5 x 165.0 x 31.5mm
(2.5 x 6.5 x 1.24 inches)
Weight (including batteries) 397g (14oz)
Case Design Aluminum case design with the gasket-sealed end
caps, waterproof membrane keypad
Transducer Connector Type LEMO
RS232 Interface Bi-directional
Packing List Elcometer FD700+ flaw detection gauge,
couplant, carry case, user manual, test certificate,
3 x AA batteries, software, transfer cable

Download Data Sheet

Download Instruction Manual

Questions / comments: