Elcometer Canadian Distributor

1 800 463-4363
My Account
|
Elcometer Canada

Elcometer 134 CSN Test Kit for Chloride, Sulphate & Nitrate

$2,457.05 CAD

A single kit solution for Chloride, Sulphate & Nitrate testing in the field

Designed to accurately measure surface chloride, sulphate and nitrate ions in minutes, the Elcometer 134 CSN Chloride, Sulphate & Nitrate Test kit offers a single kit solution for testing in the field

All the components of the Elcometer CSN Chloride, Sulphate & Nitrate Test Kit are pre-measured and pre-dosed for trouble-free testing.
Results are recorded in parts per million (ppm) requiring no complicated calculations. Elcometer 134 CSN tests are all designed to use a ratio of 1:1 for easy conversation to µg/cm².
Supplied in an ABS plastic carry case for easy portability around the site, each field kit is supplied with full instructions attached to the inside lid, together with:

  1. 5 x Chloride tests
  2. 5 x Sulphate tests, together with 1 x colourimeter, for sulphate testing
  3. 5 x Nitrate test strips
  4. 5 x Syringes (without needles)

Surface Cleanliness

Surface contamination from salts such as chlorides, sulphates and nitrates have been shown to lead to blistering of organic coatings, particularly in immersion conditions. It is not sufficient to measure the cleanliness of the substrate. In a multi-layer coating process, it is necessary to monitor and record the cleanliness of each layer prior to applying the next coating. When using amine cured epoxy coatings, for example, in low ambient temperatures or in high humidity, a surface oiliness or exudate may cause inter-coating adhesion failure.

Refill kits are available for all consumables.

Technical Specifications – Elcometer 138/2 Surface Contamination Kit

Part Number Description
E138—-2 Elcometer 138/2 Surface Contamination Kit
Measurement Range pH:0pH to 14pH
Iron: 3 – 10 – 25 – 50 – 100 – 250 – 500mg/I Fe²
Chloride: 30-600µg/cm² (30ppm) Cl to 600µg/cm² (600ppm) Cl
Dimensions 300 x 220 x 75mm (11 x 8.6 x 3”)
Weight 2.1kg (4.62lb)
Packing List
  • 100 x pH test strips
  • 100 x Iron test strips
  • 40 x Chloride test strips
  • 50 x Bresle samplers
  • 3 x 5ml (0.2fl oz) syringes
  • 3 x needles
  • 30ml (1fl oz) plastic beaker
  • carry case
  • operating instructions

Data Sheet

1-Free-shipping

:::::::  SEE ALL ELCOMETER KITS AVAILABLE FOR SALE – SAVE BIG! ::::::

Designed to accurately measure surface chloride, sulphate and nitrate ions in minutes, the Elcometer 134 CSN Chloride, Sulphate & Nitrate Test kit offers a single kit solution for testing in the field

All the components of the Elcometer CSN Chloride, Sulphate & Nitrate Test Kit are pre-measured and pre-dosed for trouble-free testing.
Results are recorded in parts per million (ppm) requiring no complicated calculations. Elcometer 134 CSN tests are all designed to use a ratio of 1:1 for easy conversation to µg/cm².
Supplied in an ABS plastic carry case for easy portability around the site, each field kit is supplied with full instructions attached to the inside lid, together with:

  1. 5 x Chloride tests
  2. 5 x Sulphate tests, together with 1 x colourimeter, for sulphate testing
  3. 5 x Nitrate test strips
  4. 5 x Syringes (without needles)

Surface Cleanliness

Surface contamination from salts such as chlorides, sulphates and nitrates have been shown to lead to blistering of organic coatings, particularly in immersion conditions. It is not sufficient to measure the cleanliness of the substrate. In a multi-layer coating process, it is necessary to monitor and record the cleanliness of each layer prior to applying the next coating. When using amine cured epoxy coatings, for example, in low ambient temperatures or in high humidity, a surface oiliness or exudate may cause inter-coating adhesion failure.

Refill kits are available for all consumables.

Technical Specifications – Elcometer 138/2 Surface Contamination Kit

Part Number Description
E138—-2 Elcometer 138/2 Surface Contamination Kit
Measurement Range pH:0pH to 14pH
Iron: 3 – 10 – 25 – 50 – 100 – 250 – 500mg/I Fe²
Chloride: 30-600µg/cm² (30ppm) Cl to 600µg/cm² (600ppm) Cl
Dimensions 300 x 220 x 75mm (11 x 8.6 x 3”)
Weight 2.1kg (4.62lb)
Packing List
  • 100 x pH test strips
  • 100 x Iron test strips
  • 40 x Chloride test strips
  • 50 x Bresle samplers
  • 3 x 5ml (0.2fl oz) syringes
  • 3 x needles
  • 30ml (1fl oz) plastic beaker
  • carry case
  • operating instructions

Data Sheet

1-Free-shipping

:::::::  SEE ALL ELCOMETER KITS AVAILABLE FOR SALE – SAVE BIG! ::::::