1 item
High voltage or holiday detection method is best for testing the porosity of protective coatings on pipelines, ballast tanks, or bridges
Use Elcometer 266 holiday detector to test porosity on coatings up to 7 mm (275 mils) thick and is ideal for inspecting coatings on pipelines and other protective coatings. This holiday tester features a built-in voltage calculator which will determine and set the correct test voltage based upon the test standard and the thickness of the coating being tested.
There are also handles available for the Elcometer 266 with a two-stage safety switch to avoid accidental switch-on, which automatically cuts power to the probe should you lose grip of the handle.
ELCOMETER 266 MODEL SPECIFICATIONS
Elcometer 266 Probe Handle Voltage DC5 (0.5 – 5kV) Dual safety switch on handle to avoid accidental switch on Add to cart
Elcometer 266 Probe Handle Voltage DC15 (0.5 – 15kV) Dual safety switch on handle to avoid accidental switch on Add to cart
Elcometer 266 Probe Handle Voltage DC30 (0.5 – 30kV) Dual safety switch on handle to avoid accidental switch on Add to cart
Add to cart
SELECT YOUR MODEL ON TOP OF THE PAGE TO VIEW THE PRICE
Operation safety
- Handle features dual safety switches to avoid accidental turning on. It also has 2-stage safety switch so if you loose the grip on it, the instrument will automatically switch off.
- Ideal for two handed use: can be gripped with 2 hands, specialised ribbing provides superior protection. Specifically designed to meet standard EN61010.
- The tester emits a ticking noise to indicate voltage presence in the handle.
- A loud alarm is produced when a spark is detected. Adjust the beep volume to ensure it’s audible – even in noisy environments.
THESE HANDLES MATCH ELCOMETER 266, SOLD HERE
How to set up an Elcometer continuous high voltage Holiday Detector
Technical Specification
| Description | Part Number | Certificate |
| Elcometer 266* | D266—-4 |
 |
| High Voltage Output Accuracy | ±5% or ±50V below 1000 Volts | |
| Operating Temperature | 0°C to 50°C (32°F to 120°F) | |
| Power Supply | Rechargeable Battery Pack: battery fully charged within 4 hours | |
| Measured Current Flow Accuracy | ±5% of full scale ; 0 – 100μA maximum Output Current | |
| Typical Battery Life – Backlight Off (On) | DC5: 40 (20) hours DC15: 20 (15) hours DC30: 10 (8) hours |
|
| Instrument Case Dimensions | Waterproof, ABS case: 520 x 370 x 125mm (20.5 x 14.5 x 5”) | |
| Weight | Base unit (including battery pack): 1.2kg (2.7lb), Handle: 0.6kg (1.3lb) | |
| Packing List | Elcometer 266 DC Holiday Detector, battery pack, curly connection cable for high voltage handle, 10m (32″) signal return lead, battery charger with UK, EUR, US and AUS plugs, band brush, shoulder strap, tough plastic carry case and operating instructions | |
Standards
ANSI/AWWA C213, AS 3894.1, ASTM C 536, ASTM C 537, ASTM D 4787, ASTM D 5162-B, ASTM G 62-B, BS1344-11, DIN 55670, EN 14430, ISO 2746, ISO 29601, JIS K 6766, NACE RP0274, NACE RP0188, NACE RP0190, NACE RP0490, NACE SP0188, NACE SP0490
*When testing on concrete or cement substrates, this is where you should test if the substrate has enough moisture in it to conduct electricity; and, therefore, if it’s suitable for use with a holiday detector.
High voltage or holiday detection method is best for testing the porosity of protective coatings on pipelines, ballast tanks, or bridges
Use Elcometer 266 holiday detector to test porosity on coatings up to 7 mm (275 mils) thick and is ideal for inspecting coatings on pipelines and other protective coatings. This holiday tester features a built-in voltage calculator which will determine and set the correct test voltage based upon the test standard and the thickness of the coating being tested.
There are also handles available for the Elcometer 266 with a two-stage safety switch to avoid accidental switch-on, which automatically cuts power to the probe should you lose grip of the handle.
ELCOMETER 266 MODEL SPECIFICATIONS
Elcometer 266 Probe Handle Voltage DC5 (0.5 – 5kV) Dual safety switch on handle to avoid accidental switch on Add to cart
Elcometer 266 Probe Handle Voltage DC15 (0.5 – 15kV) Dual safety switch on handle to avoid accidental switch on Add to cart
Elcometer 266 Probe Handle Voltage DC30 (0.5 – 30kV) Dual safety switch on handle to avoid accidental switch on Add to cart
Add to cart
SELECT YOUR MODEL ON TOP OF THE PAGE TO VIEW THE PRICE
Operation safety
- Handle features dual safety switches to avoid accidental turning on. It also has 2-stage safety switch so if you loose the grip on it, the instrument will automatically switch off.
- Ideal for two handed use: can be gripped with 2 hands, specialised ribbing provides superior protection. Specifically designed to meet standard EN61010.
- The tester emits a ticking noise to indicate voltage presence in the handle.
- A loud alarm is produced when a spark is detected. Adjust the beep volume to ensure it’s audible – even in noisy environments.
THESE HANDLES MATCH ELCOMETER 266, SOLD HERE
How to set up an Elcometer continuous high voltage Holiday Detector
Technical Specification
| Description | Part Number | Certificate |
| Elcometer 266* | D266—-4 |
|
| High Voltage Output Accuracy | ±5% or ±50V below 1000 Volts | |
| Operating Temperature | 0°C to 50°C (32°F to 120°F) | |
| Power Supply | Rechargeable Battery Pack: battery fully charged within 4 hours | |
| Measured Current Flow Accuracy | ±5% of full scale ; 0 – 100μA maximum Output Current | |
| Typical Battery Life – Backlight Off (On) | DC5: 40 (20) hours DC15: 20 (15) hours DC30: 10 (8) hours |
|
| Instrument Case Dimensions | Waterproof, ABS case: 520 x 370 x 125mm (20.5 x 14.5 x 5”) | |
| Weight | Base unit (including battery pack): 1.2kg (2.7lb), Handle: 0.6kg (1.3lb) | |
| Packing List | Elcometer 266 DC Holiday Detector, battery pack, curly connection cable for high voltage handle, 10m (32″) signal return lead, battery charger with UK, EUR, US and AUS plugs, band brush, shoulder strap, tough plastic carry case and operating instructions | |
Standards
ANSI/AWWA C213, AS 3894.1, ASTM C 536, ASTM C 537, ASTM D 4787, ASTM D 5162-B, ASTM G 62-B, BS1344-11, DIN 55670, EN 14430, ISO 2746, ISO 29601, JIS K 6766, NACE RP0274, NACE RP0188, NACE RP0190, NACE RP0490, NACE SP0188, NACE SP0490
*When testing on concrete or cement substrates, this is where you should test if the substrate has enough moisture in it to conduct electricity; and, therefore, if it’s suitable for use with a holiday detector.
