Elcometer Canadian Distributor

1 800 463-4363
My Account
|
Elcometer Canada

Elcometer 127 Keane Tator Comparators for Sand Blasted Surfaces

$156.24 CAD$271.71 CAD

• Estimate surface roughness by touch and sight.
• Three version; sand, grit or shot.

The Elcometer 127 Keane Tator Comparators are available in sand, shot or grit surface profiles.

Each comparator had 5 profile grades ranging from 0.5 – 5.5mils. Designed for use with the Elcometer 127 Illuminated Magnifier, each comparator has a whole in the centre allowing for clear visual comparisons to be made.

TEstimate surface roughness by touch and sight. Three versions: sand, grit or shot. The proper and effective preparation of a surface prior to coating is essential. Making sure that the correct roughness – or profile – has been generated is essential. If the profile is too low, the adhesion of the coating to the surface will be reduced. Too high and there is the danger that the profile peaks will remain uncoated – allowing rust spots to occur.

Technical Specifications – Elcometer 127 Keane Tator Comparators & Magnifier
Part Number Description Section Profiles
E127—-2 Elcometer 127 Sand Surface Comparator 0.5, 1, 2, 3, 4 mils
E127—-3 Elcometer 127 Grit Surface Comparator 1.5, 2, 3, 4.5, 5.5 mils
E127—-4 Elcometer 127 Shot Surface Comparator 2, 2.5, 3, 4, 5.5 mils
E127—-1 Illuminated magnifier (x 5) with integrated surface comparator holder

The Elcometer 127 Keane Tator Comparators are available in sand, shot or grit surface profiles.

Each comparator had 5 profile grades ranging from 0.5 – 5.5mils. Designed for use with the Elcometer 127 Illuminated Magnifier, each comparator has a whole in the centre allowing for clear visual comparisons to be made.

TEstimate surface roughness by touch and sight. Three versions: sand, grit or shot. The proper and effective preparation of a surface prior to coating is essential. Making sure that the correct roughness – or profile – has been generated is essential. If the profile is too low, the adhesion of the coating to the surface will be reduced. Too high and there is the danger that the profile peaks will remain uncoated – allowing rust spots to occur.

Technical Specifications – Elcometer 127 Keane Tator Comparators & Magnifier
Part Number Description Section Profiles
E127—-2 Elcometer 127 Sand Surface Comparator 0.5, 1, 2, 3, 4 mils
E127—-3 Elcometer 127 Grit Surface Comparator 1.5, 2, 3, 4.5, 5.5 mils
E127—-4 Elcometer 127 Shot Surface Comparator 2, 2.5, 3, 4, 5.5 mils
E127—-1 Illuminated magnifier (x 5) with integrated surface comparator holder